Prior to insertion of the tubes into the tray, please assure that the inner plunger of each balm tube is fully down to prevent any leakage during filling. You do this by merely twisting knob on bottom until it is tight.
Fully and firmly insert tubes. Merely rotate the tube as you insert and push in until it clicks to prevent leakage, it is a tight fit so you may need to twist and push firmly.
Assure that the top of each tube is flush with the tray.
You should hear a slight sound when tube slides into place.
Pour your liquid mixture into the tray/tubes.
Use the scraper to spread evenly over the tubes.
Once solidified and cooled, then again use the scraper to scrape the excess off the top.
Remove the filled tubes.
Cap each tube.
Apply your label.
Apply safety ring and seal with heat gun.
INCLUDES:
50 balm tubes, natural color (not clear but contents visible)
50 balm tube caps, natural color (not clear but contents visible)
50 plastic seal sleeves (additional available for purchase)
